Inwell Rig

General

Model IW100, DTH Inwell Drilling Rig and Top drive all pneumatically operated drill rig. This rig is capable of drilling in any kind of medium to hard soil formation by DTH method to a depth of 100 Mt.(320 Ft) under favorable drilling conditions. The following are the detailed specifications.

Drilling Capacity   Max Drill hole diameter   Max Drilling depth S.I. 100 MM 50 Mt F.P.S. 4.0 Inches 150 Feet (Under Favorable Drilling Conditions) Prime Mover: The system shall be powered by a Truck engine with suitable PTO arrangement. Mounting Platform Structure: Electrically welded steel structure covered with 5mm Chequered plate. Mast   Mast Length   Rotary Head Travel   Centralizer Opening Sturdy Structural Channel Type Mast of electrically welded construction, main members are made out of heavy duty structural steel channels reinforced with suitable cross members, so that it will be strong enough to withstand the varying drilling loads. 3200 mm 1800 mm 203 mm Top Head Rotary Drive Heavy duty pneumatically driven top head rotation head unit having infinitely variable speed (0 to 70 Rpm) will be provided. This unit travels on the mast and is of sturdy construction to absorb sudden & varying shock loads generally encountered during drilling operations. Rotary Head Output   Output Speed   Output Torque   Gear Ratio 70 rpm 114 kg-m 4 cylinder–piston type air motor directly coupled to spur type gear box. B.H.P. at 1250 rpm and at 7 kg/cm2: 4.0-4.5 1:30 Feed System   Pull Up   Pull Down   Pull Up speed Feed system is provided with adequate travel for handling drill pipes and casing pipes unto 5 feet long. The feed and hoist are actuated by a suitable pneumatic cylinder arrangement. The feed system has the following capabilities. 2200 Kg-f 2200 Kg-f 15 Mt/Min Air Compressor   Air Compressor capacity   Make 475 CFM / 150 PSI ELGI / Equivalent reputed make. Note: The compressor shall be mounted on the separate truck/ trolley as per the customer requirement with extra cost. Airline Lubrication   Air Flow Capacity   Air Pressure 600 CFM 200 PSI

Note:

• In view of continuous R & D and Product Improvement programme all specification, features etc. are subject to amendments without prior notice.
• Getech drilling rig can be supplied to custom built models in various Configuratiosns, Mounting features to suit all special requirements and Technical Specifications can one offered accordingly.

Inwell Rig General
INWELL-100 Model, Tripod mounted Top drive DTH cum rotary drill Rig is capable of drilling in different formations such as medium to Hard Rock by DTH, Unconsolidated and alluvial formation by Rotary method up to a depth of 330 feet, under favorable drilling conditions. The following are the detailed specifications.
Drilling Capacity   Drill hole diameter   Drilling depth   O.B DTH Drilling 4.5”(114mm) 330’(100 m.) 7.0”(178mm) Rotary Drilling 4.5”(114mm) 330’(100 m.) 7.0”(178mm) Tripod: Tripod will be fabricated with heavy duty seamless pipe. It will use to mount the mast assembly. Power pack:   Make   Power The hydraulic system shall be powered by diesel engine with suitable PTO arrangement. The engine, hydraulic tank and pump will be mounted on a towable trolley Greaves or any equivalent 15 hp Mast Assembly   Mast overall Length   Rotary Head travel   Centralizer opening Sturdy structural channel mast electrically welded with suitable cross members to withstand shock loads. 2700mm 1800mm 8 inch (203mm) Feed System   Pull Back   Pull Down   Hoisting speed Feed and Hoist operation will be achieved linear or rotary actuator with chain feed or wire rope. 3000 Kgf 2000 Kgf 10Mtr/Minute Having adequate travel to handle drill pies and casing pipes up to 1.5 Mtr. Long. Rotary Head Assembly (Top Head Drive)   Torque   Rotation Speed Fabricated sturdy steel body and designed to withstand the sudden shock loads. The RH unit travels on Mast assembly. 80 Kg-m Spindle RPM: 0-100 Hydraulics   Max operating pressure   Hydraulic Tank   capacity   Filtration (Nom) – Return line The entire Equipment is designed to operate at high temperature encountered in the normal weather conditions. Open loop circuit with fixed displacement pumps and proportional valves for feed and rotation. Diverter valves for auxiliary drives. 160 Kg/Cm2 50 Liters 10/25 Microns Cooling: Fin type oil to Air Control Panel All Necessary control and monitoring valves and gauges are installed at control panel. Centrifugal pump (optional)  Make   Flow   Pressure Centrifugal pump will be driven by separate diesel engine with V-belt and pulley. The complete unit will be mounted on towable trolley KSB 600 lpm 8 bar Air compressor (optional)   Capacity   Make Air compressor will be mounted on two wheel trolley 450 Cfm/150 PSI ELGI. Note: The compressor shall be mounted on the separate truck/ trolley as per the customer requirement with extra cost. Airline Lubricator   Capacity   Make Line oiler will be provided for DTH hammer lubrication. Spinc 450 cfm/150psi

Note:

• In view of continuous R&D and product improvement programme all specification; features etc. are subjected to amendments with out prior notice.
• Drilling rigs can be supplied in custom-built models in various configurations and Mounting features to suit all special requirements.