Water Well Drilling Rigs Back to Drilling Rigs Truck Mounted Drilling Rigs DTH DTH cum Rotary Combination Piling Core Drilling Tractor Mounted Drilling Rigs Trailer Mounted Drilling Rigs     DTH DTHR     TBW 40 Air Compressor     DTH 300 DTH cum Rotary     GDTHR 200 Compressor Mounted Truck     DTHR 300 Compressor Mounted Truck     CDTH 300 CDTH     Portable auger drill rig Portable auger drill rig DTHR / ROTARY DRILL RIG Brief Technical Specification           DESCRIPTION MODELS DTHR 300 DTHR450 DTHR 600 Drilling Capacity: Drill hole size Max. Remaining Size (in steps) Max. Depth Drill rod size 10.0” (254mm) 14.0” (335mm) 984 ft (300 mtrs) 4.5” (114 mm) 10.0” (254mm) 14.0” (335mm) 1475 (450 mtrs) 4.5” (114 mm) 10.0” (254mm) 16.0” (406mm) 1965 ft (600 mtrs) 4.5” (114 mm) (Under Favourable Drilling Condition) Mast: Construction Centraliser opening R.H Travel Sturdy Box Type 16.0” (406mm) 23 ft (7 mtrs) Sturdy Box Type 16.0” (406mm) 23 ft (7 mtrs) Sturdy Box Type 18.0” (457mm) 23 ft (7 mtrs) Rotary Head: Max. Speed Max. Torque 0 to 120 rpm 434 Kgf 0 to 120 rpm 475 Kgf 0 to 120 rpm 519 Kgf Feed System: Pull Up Force (Max.) Pull Down Force (Max.) Rapid speed (up) 11285 Kgf 5525 Kgf 40 m/min 16085 Kgf 8480 Kgf 30 m/min 21990 Kgf 11215 Kgf 24 m/min Hydraulic System: Max. Operating Pressure Filtration (Nom) Return Tank Capacity 220 bar 10 microns 750 ltrs 240 bar 10 microns 800 ltrs 210 bar 10 microns 800 ltrs Prime Mover: Input Drive Driven by suitable Diesel engine Driven by suitable Diesel engine Driven by suitable Diesel engine Levelling Jacks: Cylinder Stroke 4 No.s Ø 125mm X 610mm 4 No.s Ø 125mm X 610mm 4 No.s Ø 125mm X 610mm (System Consists of Reverse Flow Resricted Valves) Break Out Wrench: Actuation Type Cylinder Stroke Hydraulic 300 mm Hydraulic 300 mm Hydraulic 300 mm Mud Pump: Bore Stroke Max. Flow Max. Pressure Drive 152 mm 152 mm 1021 LPM 15 Kg/cm² Hydraulic 152 mm 152 mm 1021 LPM 15 Kg/cm² Hydraulic 152 mm 200 mm 1361 LPM 20.75 Kg/cm² Hydraulic Options: Oil Cooler Type Water Injection Pump Flow Max. Presssure Type of Drive Manual operated Rod changer & Jib Hoist - Welding Generator Hydraulic Driven Hydraulic Driven Fin type oil to air 36 Lpm 30 Kg/Cm² Hycraulic Manual operated Rod changer & Jib Hoist - Welding Generator Hydraulic Driven Hydraulic Driven Fin type oil to air 36 Lpm 30 Kg/Cm² Hycraulic Manual operated Rod changer & Jib Hoist - Welding Generator Hydraulic Driven Hydraulic Driven Fin type oil to air 55 Lpm 42 Kg/Cm² Hycraulic Compressor/Rod changer/Hoist/Water pump with drive are offered as the per the requirement of the customer technical specifications GETECH Industries Products can be supplied in custom – built models in various configurations, Mounting features to suit all special requirements and Technical specifications can be offered accordingly (In view of continuous R&D and Product Improvement programme all specifications, features etc., are subject to amendments without prior notice) DTH DRILL RIGS Technical Specifications Description Models DTH 1000 DTH 1500 DTH2000 Drilling Capacity: Drill hole size Max. Depth Drill Rod Size 6.0” – 8.0” (152mm – 203mm) 1000ft (305mtrs) 4.5” (114mm) 6.5” – 8.0” (168mm – 203mm) 1500ft (457mtrs) 4.5” (114mm) 6.0” – 10.0” (152mm – 254mm) 2000ft (610mtrs) 4.5” (114mm) (Under favourable drilling conditions) Mast: Construction Centraliser opening Rod/Casing handling Sturdy channel 270 mm 6.0 mtrs. Sturdy channel 270 mm 6.0 mtrs. Sturdy channel 305 mm 6.0 mtrs. Rotary Head: Max. Speed Max. Torque 0 to 100 rpm 245 kgf 0 to 100 rpm 245 kgf 0 to 100 rpm 490 kgf Feed System: Pull up Force Pull down Force Pull up speed 8590 kgf 5890 kgf 42 m/min 14070 kgf 7420 kgf 30 m/min 20940 kgf 10680 kgf 20 m/min Hydraulic System: Pump Reservoir capacity Operating Pressure Gear / Vane / Piston 600 ltrs. 210 bar (3000 psi) Gear / Vane / Piston 600 ltrs. 210 bar (3000 psi) Gear / Vane / Piston 600 ltrs. 210 bar (3000 psi) Levelling Jacks: Quantity Bore X Stroke Length 4 Nos. 100mm X 610mm 4 Nos. 125mm X 610mm-2 100mm X 610mm-2 4 Nos. 125mm X 610mm Air Line Lubricator: Type Max. Pressure Venture Type 450 psi Venture Type 450 psi Venture Type 450 psi Options: a) Rod Changer b) Oil cooler Type c) Welding Generator d) Water Injection pump Flow Max. Pressure Manual operated Rod changer Hydraulic Driven Fin type oil to air Hydraulic Driven 36 LPM 425 psi Manual operated Rod Changer & Jib Hoist Hydraulic Driven Fin type oil to air Hydraulic Driven 55 LPM 600 psi

DTH Cum ROTARY DRILL RIG DTHR – 600

Technical Specifications

• DTH Drilling To Hole Diameter: 203 mm (8”inches) and Maximum depth: 600 meters, Rotary Drilling to Hole Diameter: 311 mm (12¼”), Maximum Remaining Diameter: 407 mm (16”) and Maximum Depth: 600 meters. 6 X 4 Carrier Truck Minimum. Load capacity of 25 Tonnes
• Prime Mover engine capacity: 260HP @ 2200 RPM
• Mast Overall Length: 9000mm
• Feed System has Pull Back: 22500Kgf and Pull Down: 11000Kgf
• Rotary Head Assembly torque upto 600 Kg-m
• Stabilizer Cylinder bore Dia of 125mm Break out Winch has Cylinder bore Dia: 80mm and Stroke: 300mm.
• Mud Pump Max Flow of 1685 Liter/min
• Air Compressor to 1350 Cfm/350 PSI

MINI CRAWLER MOUNTED HYDRAULIC RIGS

GETECH Hydraulically operated multi purpose Mini crawler Mounted Rigs are specially designed for fast & cost effective drilling by air, mud or foam drilling methods using down-the-hole hammers & bits, core barred and tools, rotary tricone bits and other conventional tools as per customer’s choice, Hydraulic system powered by Deck engine is operated by fixed displacement pump with proportional valve, which regulates track motors, rotary head speed, feed etc., Centralized control panel located close to the drilling point ensures convenience of operation, GETECH Rigs require minimum maintenance and easy to operate.

Technical Data

GETECH Products can be supplied in custom - built models in various configurations, Mounting features to suit all special requirements and Technical specifications can be offered accordingly.

(In view of continuous R&D and Product Improvement programme all specifications, features etc., are subject to amendments without prior notice)

GETECH – 1000 SP Drilling Rig

• Maximum Drill hole Diameter – 20” and
• Maximum depth – 10 ft. And 6” – 12” upto a depth of 1000ft
• Mast Length – 8800 mm
• Rotary head speed 0 – 65 R.Pm. Rotary head Torque 0 – 900 Kg-m
• Feed system pull up – 11,200 Kgs
• Feed system pull down – 5500 Kgs
• Engine – 260 HP @ 2200 R.Pm
• Fitted with mobile Crane
• Fitted with 1150/300 IR. Compressor

DTH 300

General: DTH300 Model, Top drive DTH Rig is capable of drilling in different formations such as medium to hard Rock by DTH, upto a depth of 300 Meters, Under favorable drilling conditions.
The following are the detailed specifications

Optinals: Single rod changer, Auxiliary winch, Separate truck for Air compressor mounting

Note:

• In view of continuous R & D and product improvement programme all specification, features etc. are subjected to amendments with out prior notice.
• Getech drilling rigs can be supplied in custom-built models in various configurations and Mounting features to suit all special requirements.

Rotary cum DTH 300 Drilling Rig

General: Rotary cum DTH 300 Model, Top drive Rotary Cum DTH Rig is capable of drilling in different formations such as Alluvial formations using Air/Water flush by Rotary method and Hard Rock by DTH, upto a depth of 300 Meters, Under favourable drilling conditions.
The following are the detailed specifications

Note:

• In view of continuous R&D and product improvement programme all specification; features etc. are subjected to amendments with out prior notice.
• Getech drilling rigs can be supplied in custom-built models in various configurations and Mounting features to suit all special requirements.

GDTHR 200 DTH cum ROTARY DRILL RIG

General: GRD200 Model, Top drive DTH Cum Rotary Rig is capable of drilling in different formations such as Hard Rock by DTH, Unconsolidated / Alluvial formations using Air/Water flush by Rotary Method, up to a depth of 200 Meters, Under favorable drilling conditions. The following are the detailed specifications.

Note:

• In view of continuous R&D and product improvement programme all specification; features etc. are subjected to amendments with out prior notice.
• GETECH drilling rigs can be supplied in custom-built models in various configurations and Mounting features to suit all special requirements.

DTHR 300 DTH cum ROTARY DRILL RIG

General:DTHR300 Model, Top drive DTH Cum Rotary Rig is capable of drilling in different formations such as Hard Rock by DTH, Unconsolidated / Alluvial formations using Air/Water flush by Rotary Method, up to a depth of 300 Meters, Under favorable drilling conditions. The following are the detailed specifications.

Note:

• In view of continuous R&D and product improvement programme all specification; features etc. are subjected to amendments with out prior notice.
• GETECH drilling rigs can be supplied in custom-built models in various configurations and Mounting features to suit all special requirements.

CDTH300 CORE cum DTH DRILL RIG

General:CDTH300 Model, Top Head drive hydraulically operated drill Rig is capable of drilling in any kind of medium to hard rock formation to extract mineral samples by core drilling and non coring by DTH method up to a maximum depth of 300 Meters. Under favorable drilling conditions. The following are the detailed specifications.

Note:

• In view of continuous R&D and product improvement programme all specification; features etc. are subjected to amendments with out prior notice.
• GETECH Industries drilling rigs can be supplied in custom-built models in various configurations and Mounting features to suit all special requirements.

GETECH PADR3-100 Auger Drill Rig

General:PADR3-100 Model, Portable auger drill rig is capable of drilling in soft formation with hand held auger head up to a depth 3 meters. Under favorable drilling conditions. The following are the detailed specifications.

Description Model: PADR3-100, Portable auger dill Rig Capacity: Diameter Depth 100 mm (4 inch) 3 Meters (10 feet) Power pack trolley: Power pack will be mounted on three wheel portable trolley. The front wheel can be tilt up to 180 degrees. The trolley will accommodate Engine, Hydraulic pump and drive assembly, Hydraulic tank, Hydraulic oil cooler etc. Manual towing arrangement will be provided. Prime Mover: Engine make Type Model Rated capacity The system shall be powered by diesel driven engine with suitable PTO arrangement. Greaves or Any other reputed make GA-75 1510 10hp @ 3000 RPM or equivalent Drill head Speed Torque Type Hand held drill head will be provided. The drill head will be provided with removable cross handle. The drill head can be handled by two persons. 60 rpm 45 kg.m Direct drive by hydraulic motor Feed System Manual feed. Two hooks/ Eye bolt will be provided for lifting purpose. Rotary Head Assembly: (Top Head Drive) Torque / Rotation Speed Fabricated steel body and spur gear reduction Stage-2 0-180 kg.m / 0-200 RPM Stage-1 0 – 80 kg.m / 0-1000 Rpm The RH unit travels on Mast assembly of sturdy construction to absorb sudden shock loads encountered during drilling operation. Swing/Slide out arrangement Hydraulics: Max operating pressure Hydraulic Tank capacity Filtration (Nom) – Return line The entire Equipment is designed to operate at medium temperature encountered in the normal weather conditions. Open loop circuit with fixed displacement pump and directional control and pressure relief valve for rotation. 140 Kg/Cm2 30 Liters 25 Microns Cooling: Fin type oil to Air.

Note:

• In view of continuous R&D and product improvement programme all specification; features etc. are subjected to amendments with out prior notice.
• GETech drilling rigs can be supplied in custom-built models in various configurations and Mounting features to suit all special requirements.